HP StorageWorks 2.12 Edge Switch - Manual (Page 228)

Information and Error Messages
228 Error Messages
Invalid response
received from director.
An error occurred at
the director during a
firmware download
operation.
Retry the firmware download
operation. If the problem
persists, contact the next level of
support.
Invalid serial number
for this feature key.
The serial number and
the feature key did not
match.
Ensure that the feature key
being installed is specifically for
this director serial number.
Invalid UDP port
number.
The specified user
datagram protocol
(UDP) port number is
invalid. The number
must be an integer
from 1 through 65535
inclusive.
Verify and enter a valid UDP
port number from 1 through
655535.
Invalid value for
BB_Credit.
At the Configure Fabric
Parameters dialog box,
the buffer-to-buffer
credit (BB_Credit)
value must be an
integer from 1 through
60 inclusive.
Verify and enter a valid number
between 1 through 60.
Invalid value for Low
BB Credit threshold
(1-99) %.
Low BB Credit
Threshold field in
Configure Open
Trunking dialog box
must have entries in the
range from 1 and 99.
This message only
displays if the optional
Open Trunking feature
is installed.
Enter a value from 1 to 99 into
the Low BB Credit Threshold
field of the Configure Open
Trunking dialog box.
Invalid value for day
(1-31).
At the Configure Date
and Time dialog box,
the DD value (day)
must be an integer
from 1 through 31
inclusive.
Verify and enter a valid date.
Table 8: Element Manager Messages (Continued)
Message Description Action