HP StorageWorks 2.12 Edge Switch - Manual (Page 127)

Configuring the Switch
127 Edge Switch Element Manager User Guide
2. Choose a configuration entry by clicking on the row. Then use one of the
following procedures.
■ To modify a stored configuration:
Click Modify. The Configure Addresses dialog box displays for the
configuration. For details on using this dialog box, see “
Configuring Port
Addresses (FICON Management Style) ” on page 123.
■ To delete a stored configuration:
Click Delete. A warning displays before deletion.
■ To copy a stored configuration:
Click Copy to copy the configuration and rename/describe it.
When the Copy Address Configuration dialog box displays, provide a
name and description for the configuration. Names must be between 1 and
8 characters in length. Valid characters are uppercase A-Z, 0-9, hyphen
(-), and underscore (_). The name may not be CON, AUX, COMn (where
n=1-9), LPTn (where n=1-9), NUL, or PRN. Descriptions must be
between 0 and 24 characters in length. Up to 24 alphanumeric characters
are allowed, including spaces, hyphens and underscores. Click OK and
the configuration is added to the library.
■ Activate a stored configuration
Click Activate to activate the configuration and send it to the switch for
immediate use. A warning displays before the action occurs.
Note: If Active=Saved is enabled in through the Configure FICON Management
Server dialog box (Configure menu), this overwrites the current IPL address
configuration.
3. When finished managing the library, click Close to close the dialog box.