HP StorageWorks 2.12 Edge Switch - Manual (Page 126)

Configuring the Switch
126 Edge Switch Element Manager User Guide
4. Click the Port Name field and enter a name.
Names must be between 1 and 8 characters in length. Valid characters are
uppercase A-Z, 0-9, hyphen (-), and underscore (_). The name may not be
CON, AUX, COMn (where n=1-49), LPTn (where n=1-39), NUL, or PRN.
5. Click in the CUP Name field and enter a name (optional).
Names must be between 1 and 24 characters. All characters in the
ISO Latin - 1 character set are allowed, except for control characters. The
space character is not allowed in the first character, and characters are
case-sensitive. A CUP name is optional.
6. Click OK to save changes and to close the Save Address Configuration As
dialog box.
7. In the Configure Addresses - “Active” dialog box, click Activate to activate
the configuration or click Cancel to close without activating.
Note: If you click Cancel after saving, your configuration will still be added to the
library without being activated.
Managing Stored Address Configurations (FICON Management Style)
After address configurations are created through the Configure Addresses -
“Active” dialog box, they are saved to the Address Configuration Library. Use this
procedure to manage address configurations in the Address Configuration Library.
To manage saved library entries:
1. Click Configure > Addresses > Stored. The Address Configuration Library
dialog box displays.
Figure 36: Address Configuration Library dialog box