HP StorageWorks 2.12 Edge Switch - Manual (Page 24)

Element Manager Overview
24 Edge Switch Element Manager User Guide
■ Configure a nickname to display instead of the world wide name (WWN) for
the switch and attached nodes.
■ Configure Port Binding and port speed.
■ Configure SNMP trap recipients and community names.
■ Configure Switch Binding if the optional SANtegrity Binding feature is
installed.
■ Configure Open Trunking if the optional OpenTrunking feature is installed.
■ Configure Open Systems Management Server features if the optional Open
Systems Management Server feature is installed.
■ Configure the switch name, location, description, and contact person.
■ Control individual Fibre Channel ports by blocking/unblocking operation,
enabling LIN alerts and Port Binding, and running internal and external
loopback diagnostics.
■ Display field replaceable unit (FRU) properties such as the FRU name,
physical position in the switch (chassis slot number), active/failed state, part
number, and serial number.
■ Display information for individual Fibre Channel ports, such as the port name,
port number, Fibre Channel address, operational state, type of port, and login
data.
■ Display information on nodes attached to ports.
■ Display port performance and statistics.
■ Display vital product data for the switch, such as the system name,
description, contact person, location, status, model number, firmware and
Engineering Change (EC) level, and manufacturer.
■ Enable beaconing for ports and the switch unit.
■ Monitor the operational status of the switch and each of its hardware
field-replaceable units.
■ Perform an initial program load (IPL).
■ Perform maintenance tasks for the switch, including maintaining firmware
levels, administering the Call Home Notification feature, accessing the switch
logs, and collecting data to support failure analysis.
■ Reset port operation.