HP StorageWorks 2.12 Edge Switch - Manual (Page 34)

Element Manager Overview
34 Edge Switch Element Manager User Guide
Enable Telnet
Click this option to enable telnet access to the switch. This puts a check mark in
the box next to the menu option. Click the option again to clear the check mark
and disable telnet access. When this option is disabled, users at remote
workstations cannot access the switch through telnet to use the Command Line
Interface (CLI).
Logs Menu
The Element Manager provides logs that show a record of various events that have
occurred on the switch. Click the Logs menu to display the following options.
For detailed information on using these dialog boxes, see “ Using Logs ” on
page 149.
Audit Log
This log provides a record of all configuration changes made on the switch. Each
entry displays the date and time of the change, a description of the change, the
source of the change (such as the HAFM appliance or SNMP management
station), and an identifier for the source, such as the IP address of the HAFM
appliance or SNMP management station.
Event Log
Click this option to display the switch event log. This log provides a record of
significant events that have occurred on the switch, such as hardware failures,
degraded operation, and port problems. Each entry includes the date and time of
the event, a reason code for the event, the severity level, a brief description, and up
to 32 bytes of supplementary event data. Refer to the appropriate service manual
for your Edge Switch for more information.
Hardware Log
This log displays information on FRUs inserted and removed from the switch.
Each log entry includes the name of the FRU inserted or removed, the slot
position relative to identical FRUs installed, whether the FRU was inserted or
removed, the FRU part number and serial number, and the date and time the FRU
was inserted or removed.