HP StorageWorks 2.12 Edge Switch - Manual (Page 223)

Information and Error Messages
223 Edge Switch Element Manager User Guide
Director must be offline
to configure.
Clock alert mode is
enabled through the
Configure FICON
Management Server
dialog box and you
attempted to enable
Periodic Date/Time
Synchronization
through the Configure
Date and Time dialog
box.
Disable clock alert mode
through the Configure FICON
Management Server dialog
box.
Disabling Insistent
Domain ID will disable
Fabric Binding. Do you
want to continue?
Fabric Binding is
enabled through
HAFM and you
attempted to disable
Insistent Domain ID in
the Configure Switch
Parameters dialog box.
Click Yes if you want to
continue and disable Fabric
Binding.
Disabling Insistent
Domain ID will disable
Fabric Binding. Do you
want to continue?
Fabric Binding is
enabled through the
HAFM and user
attempted to disable
Insistent Domain ID in
the Configure Switch
Parameters dialog
box.
Click Yes if you want to
continue and disable Fabric
Binding.
Disabling Switch
Binding will disable
Enterprise Fabric
Mode. Do you want to
continue?
You attempted to
disable Switch Binding
through the Switch
Binding State Change
dialog box, but
Enterprise Fabric Mode
is enabled.
Disable Enterprise Fabric Mode
through the Enterprise Fabric
Mode dialog box before
disabling Switch Binding.
Do you want to
continue with IPL?
This message requests
confirmation to initial
program load (IPL) the
director.
Click Yes to IPL the director or
Cancel to cancel the operation.
Domain IDs must be in
the range of 1 to 31.
Domain IDs entered in
the Configure Preferred
Paths dialog box must
fall in a specific range.
In the Configure Preferred Paths
dialog box, change the number
in the Destination Domain ID
field to a number between 1
and 31, inclusive.
Table 8: Element Manager Messages (Continued)
Message Description Action