HP StorageWorks 2.12 Edge Switch - Manual (Page 134)

Configuring the Switch
134 Edge Switch Element Manager User Guide
Click Activate on the Enable Feature Key dialog box to activate the new feature
key. An IPL will occur, during which the Ethernet connection between the HAFM
appliance and director is momentarily interrupted. This will not disrupt Fibre
Channel traffic.
Note: If you click Activate, all current features will be replaced with new features. That
is, if there are features shown in the current list that are not shown in the new list, then
those features will be removed from the switch or director.
Because the switch or director is placed offline when you activate the Element
Manager feature key, the Element Manager will not launch until it comes back
online and you either:
■ Right-click the switch or director and click Element Manager.
■ Choose the switch or director and click the Launch Element Manager icon on
the tool bar.