GW Instek GSP-830 User Manual - Manual (Page 97)

BANDWIDTH
97
100kHz 6MHz≤Span<20MHz Optional
(10k/100kHz
RBW)
120kHz 6MHz≤Span<19MHz Optional (EMI
Filter – page146)
300kHz 6MHz≤Span<60MHz Standard
4MHz 60MHz≤Span Standard
Check RBW
installation status 1. Press the System key.
System
2. Press F6 (More).
More... F 6
3. Press F4 (System Config On) to
show the system configuration
in the display.
System Config
On Off
F 4
Optional
Items
4. Check the optional items
corner and see the RBW
installation status (checkmark
– installed, blank – not
installed)
Installed
Not installed
5. Press F4 (System Config Off)
to close the system
configuration.
System Config
On Off
F 4
Note 9k/120kHz RBW (EMI Filter) and 10k/100kHz RBW
are exclusive; cannot be installed together. For installing
a new optional RBW, contact the service center.