GW Instek GSP-830 User Manual - Manual (Page 109)

DISPLAY
109
Enter Display Title
Panel operation 1. Press the Display key.
Display
2. Press F3 (Title).
Title... F 3
3. Select the character from F2
to F4 and press it. (When
entering numbers 0 to 9, press
one from F2 to F4 anyway)
(Capital
Letter)
F 2
(Small
Letter)
F 3
(Symbol) F 4
4. Here is how to type in the
capital letter “S”. Press F2
(Capital Letter) repeatedly
until the cursor reaches S.
(Capital
Letter)
F 2
Q R S T U
5. Press the Enter key. S appears
in the command window.
TL S
To enter the number “2”,
press the number 2 key.
To delete (undo) previously
entered character, press the
BK SP key.
6. Continue the above until all
the characters are entered.
TL SATEST
(SATEST)
7. Press F5 (Show Title).
Show Title F 5
8. The entered title appears at
the top left corner of the
display.
9. To erase the title, press F1
(Clear Title).
Clear Title F 1
Parameter Capital letter Upper case alphabet, A to Z.
Small letter Lower case alphabet, a to z.
Number 0 to 9.