GW Instek GSP-830 User Manual - Manual (Page 24)

GSP-830 User Manual
24
2. View the
signal
Press the Autoset key→F1 (Autoset).
Autoset Autoset F 1
The GSP-830 automatically configures the horizontal and
vertical scales and shows the signal on the display.
Check the peak frequency and amplitude that appear on
the top right corner of the display. To move the marker,
use the Scroll knob or Left/Right keys .
Internal auxiliary signal, -30dBm @100MHz
Peak frequency/amplitude
If the displayed value does not match the actual signal,
contact the service center.