GW Instek GSP-830 User Manual - Manual (Page 174)

GSP-830 User Manual
174
Optional Items Specifications
Frequency Range 9kHz to 3.0GHz
Amplitude Range -50dBm to 0 dBm
Amplitude Accuracy ±1dB @100MHz, 0dBm
Amplitude Flatness ±1dB @0dBm
Harmonics <-30dBc typical
Reverse Power +30dBm
Impedance Type: N female, 50Ω nominal
Opt.01 Tracking
Generator
RF Output VSWR < 2:1
Opt.02 Battery Pack Battery Type 11.1V Li-Ion battery pack x 2
Output Range ±1ppm, 0to50°C
Opt. 03 ±1ppm Stability
Aging Rate ±1ppm / year
RBW Selection 300Hz
Opt. 04 300Hz RBW
RBW Accuracy 20%
RBW Selections 9kHz and 120kHz, 6dB bandwidth Opt. 05 9kHz&120kHz
RBW(= EMI Filter)
RBW Accuracy 15%
RBW Selections 10kHz and 100kHz, 3dB bandwidth Opt. 06 10kHz &
100kHz RBW
RBW Accuracy 15%
Demodulation AM, FM
Output 3.5mm stereo jack wired for mono operation
RBW Selections 10kHz and 100kHz, 3dB bandwidth
Opt. 07 Demodulator
RBW Accuracy 15%
Opt. 08 GPIB Interface Compliant standard IEEE 488 bus
ADP-001 BNC(J/F)to N(P/M) adaptor
ADP-002 SMA(J/F)to N(P/M) adaptor
ADP-101 BNC(J/F)75Ω to BNC(P/M)50Ω adaptor
ATA-001 BNC antenna
ATN-100 10dB attenuator N(J/F) to N(P/M)
GAK-001 Termination 50Ω N(P/M)
GAK-002 Cap with chain N(P/M)
GAP-801 10dB Preamplifier: 9kHz to 6GHz, 10dB typical
GAP-802 20dB Preamplifier: 9kHz to 3GHz, 20dB typical
ADP-002 SMA (J/F) to N (P/M) adaptor x 2 GKT-001 General Kit Set
ATN-001 10dB Attenuator, N (J) to N(P) x 1