GW Instek GSP-830 User Manual - Manual (Page 141)

SEQUENCE
141
2. Select running
mode
1. Press F4 (Run).
Run... F 4
2. Press F1 (Run Mode) to select
the running mode, repeat
(Rept) or single (Sngl).
Run Mode
Rept Sngl
F 1
Repeat Repeats running a sequence until F6 (Stop)
is pressed. Note: F6 (Stop) menu appears
only when the sequence is running.
Single Runs the sequence once.
3. Run sequence 1. Press F2 (Run Now).
Run Now F 2
2. If the sequence editing has
not yet finished, a warning
message appears. In such case,
stop (finish) the editing
process first (page140).
Stop Edit First!
3. The sequence icon appears at
the bottom of the display.
4. To stop running, press F6
(Stop). In the single mode, the
sequence automatically stops
when all steps are completed.
Stop F 6
Save/copy/delete/rename sequence file
Background Sequence files can be saved, copied,
deleted, or renamed using the file
utility. Press the File key to access
each function.
File
Save/Copy Press F1 (Copy). For detailed steps,
see page115.
Copy... F 1
Delete Press F2 (Delete). For detailed steps,
see page118.
Delete... F 2
Rename Press F3 (Rename). For detailed
steps, see page120.
Rename... F 3