GW Instek GSP-830 User Manual - Manual (Page 123)

PRESET
123
P
RESET
Pressing the Preset key returns the GSP-830 to the
factory default parameters as defined below.
Frequency Center: 1.5GHz
Start: 0Hz Stop: 3GHz
Step: 1MHz
Span 3GHz
Amplitude Ref.level: 0dBm
Unit: dBm
Scale: 10dB/ External Gain: 0dB
Input Z: 50Ω
Autoset Amplitude Floor: Auto Span: Auto
Marker Marker: Off
Marker Table: Off Marker Trace: Auto
All Marker: Off
Peak Search Peak Table: Off
Peak Threshold: Off Peak Sort: Freq
Peak Track: Off
Trace Trace: A
Average: Off, 20 Mode: Clear
Detection: Normal
Meas ACPR, OCBW: Off
CH SPC: 0
CH BW: 600MHz
OCBW %: 0 N dB, Phase Jitter: Off
Adj CH Offs: 0MHz
Adj CH BW: 0MHz
Limit Line H & L Limit: Off Pass/ Fail: Off
BW RBW, VBW, Swptime: Auto Average: Off, 20
Trigger Trigger Delay: 50ms
Trigger Mode: Normal Trigger Freq: 1.5GHz
Display LCD Dimmer: 5
Split Window: Off Display Line: Off
Display Title: Off
File Copy Type: Int. Trace Delete Type: Int. Trace
System GPIB Add: 2
Aux Sig: Off System Config: Off
Clock: On
Option External Ref Freq: 10MHz
TG Norm Corr: Off
Demod AM: Off TG Output: Off
TG Ref Value: 0dBm
Demod FM: Off
Sequence Sequence: 1 Run Mode: Single