GW Instek GSP-830 User Manual - Manual (Page 118)

GSP-830 User Manual
118
3. When the file copy is done, the
destination file attribute changes
from Empty to Full and/or the
date becomes updated.
TraceC
TraceB
Destination
File Function: Copy
Item Name
Type: Trace Memory Internal
TraceA
Trace1
Remark
Full
Date
2007/07/09 10:41
Note If the source file does not
contain data, a warning message
appears. In this case, re-select a
source file with actual data.
Selected File Is Empty!
Delete File
1. Connect USB
flash drive (for
external file)
When using the USB flash drive
(external file) for source or
destination, connect the drive to the
front panel connector.
The USB icon turns on when the flash drive is
detected.
2. Select source file 1. Press the File key.
File
2. Press F2 (Delete).
Delete... F 2
3. Press F1 (Type). The file
deletion window appears.
Type... F 1
File Function: Delete
Item Name
Type: Memory
Remark Date