Reset rbw/vbw/sweep time to auto, Press the trace key, Press f6 (more) – GW Instek GSP-830 User Manual User Manual
Page 102: Available only when average is on), Press the bw key, Gsp-830 user manual, Panel operation (method2), Parameter 2 to 200, Avg number after power on/preset, Panel operation

GSP-830 User Manual
102
2. Press F4 (AVG On) to turn on
averaging. The current average
number setting appears in the
command window.
AVG
On Off
20
F 4
AVG : 20
3. The trace average icon appears
at the bottom of the display.
4. Enter the average time using the
Numerical keys and Enter key.
BK SP
dB
Enter
GHz /
Sec
mSec
MHz /
kHz /
Sec
μ
Panel operation
(Method2)
1. Press the Trace key.
Trace
2. Press F6 (More).
More
F 6
3. Press F1 (AVG On) to turn on
the average mode. The current
average number setting appears
in the command window.
AVG
On Off
20
F 1
AVG : 20
4. The average mode icon appears
at the bottom of the display.
5. Enter the average number using
the numerical keys followed by
the Enter key.
BK SP
dB
Enter
GHz /
Sec
mSec
MHz /
kHz /
Sec
μ
Parameter
2 to 200
(Available only when Average is on)
AVG number after
power on/preset
After powering up the GSP-830 (page20) or presetting it
(page40), the average number is reset to 20 (AVG itself
is turned off)
Reset RBW/VBW/sweep time to auto
Panel operation
1. Press the BW key.
BW
2. Press F5 (All Auto). The RBW,
VBW, and sweep time setting all
change to Auto.
All Auto
F 5
RBW/VBW/Sweep
Setting after
Autoset
When using the Autoset, all three BW related
parameters, RBW, VBW, and sweep, will be reset to
Auto mode, regardless of their previous settings.