GW Instek GSP-830 User Manual - Manual (Page 95)

BANDWIDTH
95
B
ANDWIDTH
The BW (BandWidth) feature configures how narrow
the GSP-830 can sort out different signal peaks
(resolution), and how fast the display can be updated
(sweep time). Averaging the waveform is also available
for smoothing noise level. The resolution, sweep time,
and averaging are in a trade-off relationship, so
configuration should be done with care.
BW
RBW/VBW Select RBW (Resolution BandWidth)...................... 96
Select VBW (Video BandWidth) ............................. 98
RBW/VBW Auto Mode Contents ............................ 99
Sweep Time Set Sweep time..................................................... 101
Average Average Waveform................................................ 101
Reset Reset RBW/VBW/sweep time to auto ................... 102