GW Instek GSP-830 User Manual - Manual (Page 120)

GSP-830 User Manual
120
Rename File
File rename is allowed only for external (USB flash drive) files.
1. Connect USB
flash drive
Connect the USB flash drive to the
front panel connector.
The USB icon turns on when the flash drive is
detected.
2. Select file 1. Press the File key.
File
2. Press F3 (Rename). The USB
flash drive contents and the
character table appear in the
display.
Rename... F 3
3. Point the cursor to the file using
the Up/Down keys.
3. Edit file name 1. Press F1 (Edit File Name) and
turn it on.
F 1
Edit File Name
On Off
2. Move the cursor inside the
character table using the
Left/Right keys or Scroll knob.
Press the Enter key to confirm
each character.
Char Table
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z a b c d e f
g h i j k l m n o p q r s t u v w x y z 0 1 2 3 4 5 6 7 8 9
3. When completed, press F1
(Edit File Name Off) to turn it
off.
F 1
Edit File Name
On Off
4. Press F2 (Confirm). A
confirmation message appears
in the command window.
Confirm F 2
ENTER for Yes: BKSP for No:
5. To accept renaming and save
the new file name, press the
Enter key. To cancel renaming,
press the BK SP key.