GW Instek GSP-830 User Manual - Manual (Page 26)

GSP-830 User Manual
26
Operation Shortcuts
Here is the list of available operations and their shortcuts.
Power-on screen
Recall the last stored settings F3
Frequency and Span
Set Center Frequency and Span Frequency→F1→Span→F1
Set Start and Stop Frequency Frequency→F2(Start), F3(Stop)
Set Frequency Step Frequency→F4
Activate Full Span (3.0GHz) Span→F2
Activate Zero Span (Time Domain) Span→F3
Recall Last Span
Span→F4
Amplitude
Set Reference Level Amplitude→F1
Select Vertical Scale Amplitude→F2
Select Unit (dBm/dBmV/dBuV) Amplitude→F3→F1 to F3
Set External Gain Amplitude→F4
Activate Amplitude Correction Amplitude→F5→F2
Select Amplitude Correction Set Amplitude→F5→F1→F1
Delete Amplitude Correction Item Amplitude→F5→F1→F2
Delete Amplitude Correction Set Amplitude→F5→F1→F3→F2
Undo Correction Item/Set Deletion Amplitude→F5→F1→F4
Save Amplitude Correction Set
Amplitude→F5→F1→F5
Select Input Impedance (50Ω/75Ω) Amplitude→F6→F1
Set Input Impedance Offset
Amplitude→F6→F2
Autoset
Run Autoset Autoset→F1
Set Amplitude Floor Autoset→F2
Set Frequency View Span Autoset→F3
Marker
Activate Normal Marker Marker→F1→F2