GW Instek GSP-830 User Manual - Manual (Page 115)

FILE
115
Setup Panel setup data. For details, see
page125.
File format: *.set
10 files are available: Setup 1 to 10.
Copy File
1. Connect USB
flash drive (for
external file)
When using the USB flash drive
(external file) for source or
destination, connect the drive to the
front panel connector.
The USB icon turns on when the flash drive is
detected.
2. Select source file 1. Press the File key.
File
2. Press F1 (Copy). The file copy
window appears.
Copy... F 1
Source
File Function: Copy
Item Name
Type: Memory
Remark Date
3. Press F1 (Source).
Source.. F 1
4. Select the file type from F1 to
F5, press it, and then select Int
(internal) or Ext (external).
The display gets updated
accordingly. The below example
shows the internal trace files.
Trace
Int. Ext.
F 1
Limit
Int. Ext.
F 2
Correction
Int. Ext.
F 3
Seq.
Int. Ext.
F 4
Setup
Int. Ext.
F 5
TraceC
TraceB
Source
File Function: Copy
Item Name
Type: Trace Memory Internal
Remark
TraceA
Date