GW Instek GSP-830 User Manual - Manual (Page 76)

GSP-830 User Manual
76
3. Press F1 (AVG On) to turn on
the average mode.
AVG
On Off
20
F 1
4. The average mode icon appears
at the bottom of the display.
5. Enter the average number using
the Numerical keys and Enter
key.
BK SP
dB
Enter
GHz / Sec
mSec MHz /
kHz / Sec μ
Panel operation
(Method2) 1. Press the BW key.
BW
2. Press F4 (AVG On) to turn on
averaging.
AVG
On Off
20
F 4
3. Enter the average time using the
numerical keys and Enter key.
BK SP
dB
Enter
GHz / Sec
mSec MHz /
kHz / Sec μ
Range 1 to 200
Example: after
average Averaged 20 times
Move Marker to Trace
Panel operation 1. Check the active marker at the
top right corner of the display.
2. Press the Marker key.
Marker
3. Press F6 (More).
More F 6
4. Press F1 (Marker Trace).
Marker Trace
Auto A B C
F 1
Range Auto The marker moves to the active signal
or trace.