GW Instek GSP-830 User Manual - Manual (Page 30)

GSP-830 User Manual
30
Set Date System→F6→F1→F1→F1 to F4
Set Time System→F6→F1→F2→F1 to F3
Activate Clock Display System→F6→F1→F3
View Self Test Result System→F6→F2
View System Configuration System→F6→F4
Select Language System→F6→F5→F1
Option
Activate Tracking Generator Option→F1→F1
Set Tracking Generator Amplitude Option→F1→F2
Normalize Tracking Generator Option→F1→F3→F2
Activate Normalized TG Option→F1→F4
Set Ref Level for TG Normalization Option→F1→F5
Activate FM Demodulator
Option→F2→F1
Activate AM Demodulator Option→F2→F2
Activate Phone Output Option→F2→F3
Set Phone Output Volume Option→F2→F4
Set Squelch Level Option→F2→F5
View Battery Level Option→F3
Set Ext. Reference Signal Frequency Option→F4
Sequence
Select Sequence Set Sequence→F1, F2
Start Sequence Edit Sequence→F3→F1
Insert 100ms Delay Sequence→F3→F2
Insert Pause in Sequence Sequence→F3→F3
Insert Another Sequence Set Sequence→F3→F4→F1 to F2
Stop Sequence Edit Sequence→F3→F5
Insert Item to Sequence Set Sequence→F3→F6→F1
Save Sequence Set Sequence→F3→F6→F2
Delete Sequence Item Sequence→F3→F6→F3
Delete Sequence Set Sequence→F3→F6→F4→F2
Undo Sequence Item/Set Delete Sequence→F3→F6→F5
Select Sequence Run Mode Sequence→F4→F1
Run Sequence Sequence→F4→F2
Delete All Sequence Set Sequence→F5→F2