GW Instek GSP-830 User Manual - Manual (Page 114)

GSP-830 User Manual
114
File Location and File Type
File location Internal The GSP-830 internal memory. The
number of files is fixed (see below).
External The USB flash drive connected to the
front panel connector. There is no
practical limit on the number of files.
The USB icon turns on when the
flash drive is detected.
Compatibility: USB 1.1/2.0
Connector: TypeA host
Note
If it takes more than 2 seconds for the
USB icon to appear, disconnect the USB
flash drive and connect again.
File type Trace Trace waveform data. For details, see
page73.
File format: *.tra
13 files are available internally:
TraceA/B/C (current trace),
Trace 1to10 (stored trace).
Limit Limit Line data. For details, see page90.
File format: *.lmt
12 files are available internally:
LimitHL (current high limit line),
LimitHL1 to 5 (stored high limit line),
LimitLL (current low limit line),
LimitLL1 to 5 (stored low limit line).
Correction Amplitude correction data. For details,
see page52.
File format: *.cor
5 files are available: Correction 1 to 5.
Seq. Sequence data. For details, see page136.
File format: *.seq
10 files are available: Sequence 1 to 10.