GW Instek GSP-830 User Manual - Manual (Page 108)

GSP-830 User Manual
108
Change Display Brightness
Panel operation 1. Press the Display key.
Display
2. Press F1 (LCD Dimmer).
LCD Dimmer F 1
3. Change the brightness using the
Left/Right keys or Scroll knob.
Range 0 (darkest) to 5 (brightest)
Activate Display Line
Panel operation 1. Press the Display key.
Display
2. Press F2 (Display Line On).
Display Line
On Off
F 2
3. The display line appears on the
display and its level appears in
the command window.
Display Line:-50dB
Display line
4. Move the line using the
Left/Right keys or Scroll knob.
Note Display line is NOT available in the following situations.
•
Split window (page110)
•
Limit Line editing (page91)
•
Power measurements (page82)