GW Instek GSP-830 User Manual - Manual (Page 85)

POWER MEASUREMENT
85
2. Enter the adjacent channel2
bandwidth using the Numerical
and Unit keys.
Range: 1kHz to 3GHz
BK SP
dB
Enter
GHz / Sec
mSec MHz /
kHz / Sec μ
3. The value is updated in the Adj
CH BW2 column in MHz.
6. Set adjacent
channel2
offset
1. Press F4 (Adj CH Offs2).
Adj CH Offs2 F 4
2. Enter the adjacent channel 2
offset using the Numerical and
Unit keys.
Range: 1kHz to 3GHz
BK SP
dB
Enter
GHz / Sec
mSec MHz /
kHz / Sec μ
3. The value is updated in the Adj
CH Offset2 column in MHz.
7. Set channel
space
1. Press F2 (Channel SPC).
CH SPC F 2
2. Enter the channel space using
the Numerical and Unit keys.
Range: 0kHz to 3GHz
BK SP
dB
Enter
GHz / Sec
mSec MHz /
kHz / Sec μ
3. The value is updated in the
Channel Space column in MHz.
8. Move channel
up/down
1. Press F6 (Return) twice.
Return F 6
x2
2. Press F4 (CH Up) or F5 (CH
Down) to switch the
measurement to the next
channel.
CH Up F 4
CH Down F 5