GW Instek GSP-830 User Manual - Manual (Page 167)

REMOTE CONTROL
167
meas:lmtline? Returns the limit line table data. Need to specify 0 (low limit
line), 1(high limit line) / limit line points.
Example: meas:lmtline:edit_0? Returns: 3,100,0,110,3,120,2
(low limit line, 3 points, 100MHz/0dB, 110MHz/3dB,
120MHz/2dB)
meas:lmtline:edit Sets the limit line table data. Need to specify 0 (low limit
line), 1(high limit line) / limit line points.
Example: meas:lmtline:edit_0_CR_3,100,−2,110,−3,120,−2
(low limit line, 3 points, 100MHz/−2dB,
110MHz/−3dB,120MHz/−2dB)
meas:lmtline:edit:
delall Delete all points in limit line table.
Parameter: 0 (low limit line), 1(high limit line)
Example: meas:lmtline:edit:delall_0 (delete low lline table)
BW
con:rbw:auto Sets RBW to auto.
con:rbw? Returns the RBW (resolution bandwidth).
Parameter: 0 (200Hz), 1 (300Hz), 2 (3kHz), 3 (9kHz), 4
(30kHz), 5 (120kHz), 6 (300kHz), 7 (4MHz)
con:rbw:man Selects the RBW. Parameter: 0 (200Hz), 1 (300Hz), 2 (3kHz),
3 (9kHz), 4 (30kHz), 5 (120kHz), 6 (300kHz), 7 (4MHz)
Example: con:rbw:man_1 (sets RBW to 300Hz)
con:rbw:mode? Returns RBW mode. Parameter: auto, manual
con:vbw:auto Sets VBW to auto.
con:vbw? Returns the VBW. Parameter: 0 (10Hz), 1 (30Hz), 2 (100kHz),
3 (300kHz), 4 (1kHz), 5 (3kHz), 6 (10kHz), 7 (30kHz), 8
(100kHz), 9 (300kHz), 10 (1MHz)
con:vbw:man Selects the VBW. Parameter: 0 (10Hz), 1 (30Hz), 2 (100Hz), 3
(300Hz), 4 (1kHz), 5 (3kHz), 6 (10kHz), 7 (30kHz), 8
(100kHz), 9 (300kHz), 10 (1MHz)
Example: con:vbw:man_4 (sets VBW to 1kHz)
con:vbw:mode? Returns VBW mode. Parameter: auto, manual
con:swt:auto Sets the sweep time to auto.
con:swt:man Sets the sweep time in msec.
Example: con:swp:man_5 (sets the sweep time to 5ms)
con:swt? Returns the sweep time in msec.
con:swt:mode? Returns the sweep time mode. Parameter: auto, manual
con:allcouple Sets the RBW, VBW, and sweep time to auto.
Trigger
con:trig:freerun Sets the trigger to free run mode.
con:trig:video Sets the trigger to video and sets the trigger level in current
unit. Example: con:trig:video_−20 (video mode, −20dBm)