GW Instek GSP-830 User Manual - Manual (Page 28)

GSP-830 User Manual
28
Set ACPR Adjacent Channel BW Meas→F1→F4→F1 and F3
Move ACPR Channel Up Meas→F4
Move ACPR Channel Down Meas→F5
Activate OCBW Meas→F3
Set OCBW Channel Bandwidth Meas→F1→F1
Set OCBW Channel Space Meas→F1→F2
Set OCBW % Meas→F1→F3
Move OCBW Channel Up Meas→F4
Move OCBW Channel Down Meas→F5
Activate N dB Meas→F6→F1
Set N dB Value Meas→F6→F2
Activate Phase Jitter Meas→F6→F3
Set Phase Jitter Offset Meas→F6→F4→F1(Start), F2(Stop)
Limit Line
Activate Limit Line Limit Line→F1 (High), F2 (Low)
Select Limit Line for Edit Limit Line→F3→F1
Activate Limit Line Edit Table Limit Line→F3→F2
Delete Limit Line Table Item Limit Line→F3→F3
Delete All Table Item Limit Line→F3→F4→F2
Undo Last Deletion Limit Line→F3→F5
Run Pass/Fail Test Limit Line→F4
Select Pass/Fail Condition Limit Line→F5
Bandwidth
Select RBW BW→F1
Select VBW BW→F2
Set Sweep Time BW→F3
Set Trace Average Number BW→F4 or Trace→F6→F1
Reset RBW/VBW/Sweep to Auto BW→F5
Trigger
Select Free Run (Default) Trigger→F1
Select Video/External Trigger Trigger→F2
Select Trigger Mode Trigger→F3
Set Trigger Delay Trigger→F4