GW Instek GSP-830 User Manual - Manual (Page 110)

GSP-830 User Manual
110
Symbol Commonly used 14 symbols as shown
below.
\ # / _ -
. * : & (
) < > %
Use Split Display
Panel operation 1. Press the Display key.
Display
2. Press F4 (Split Window).
Split
Window...
F 4
3. The display splits into upper and lower screen. The
lower display retains the original vertical and
horizontal scale. The upper display shows full scale.
4. Select the active display (in
which the waveform is updated)
by pressing F1 (Upper) or F2
(Lower). Pressing F3 (Alternate
Sweep) updates both displays
alternately.
Upper F 1
Lower F 2
Alternate
Sweep
F 3
5. To go back to the original single
display, press F4 (Full Screen).
The currently active window is
expanded.
Full Screen F 4
Note Switching to the Full Screen from the Alternate Sweep
mode is not recommended, since it is not predictable
which display, upper or lower, will be selected.