GW Instek GSP-830 User Manual - Manual (Page 175)

Appendix
175
GTL-303 RF Cable (RD316, SMA(P), 60cm) x 2
GSC-002 Kit box x 1
ADP-001 BNC (J/F) to N (P/M) adaptor x 2
ADP-101 BNC (P/M) 50Ω to BNC (J/F) 75Ω adaptor x2
GTL-304 RF Cable (RG223, N(P)-N(J), 30cm) x 2
GKT-002 CATV Kit set
GSC-003 Kit box x 1
GAK-001 Termination, 50Ω, N(P) x 1
GAK-002 Cap with chain, N(P) x 1
GTL-302 RF Cable assembly (RG223+N(P), 30cm) x 2
GKT-003 RLB Kit set
GSC-004 Kit box x 1
ADP-01 BNC (J/F) to N (P/M) adaptor x 1
ADP-02 SMA (J/F) to N (P/M) adaptor x 1
ANT-01 6cm loop, H-Field probe x 1
ANT-02 3cm loop, H-Field probe x 1
ANT-03 6mm loop, H-Field probe x 1
PR-03 Touch passive probe, < 3GHz x 1
Test Lead RF Cable BNC (P/M) to BNC (P/M) x 1
GKT-006 EMI Probe set
Test Lead RF Cable SMA (P/M) to SMA (P/M) x 1
GRA-404 19 inch Rack adaptor panel, 4U
GTL-301 RF Cable assembly RG223, N(P/M) 100cm
GTL-302 RF Cable assembly RG223, N(P/M) 30cm
GTL-303 RF Cable assembly RD316, SMA(P/J) 60cm
GTL-304 RF Cable assembly RG223, N(P/M) to N(J/F) 30cm
GTL-401 DC power cord with DC Jack and lighter plug, 5A
GSC-001 Soft Carrying Case: available to accommodate the field operations
Frequency range 10MHz to 1GHz
Directivity 10MHz to 100MHz: > 48dB
100MHz to 1000MHz: > 38dB
Insertion loss Source to Load: < 10dB
Load to Coupler: < 7dB
Return loss Source return loss: > 7dB
Load return loss: > 11dB
Coupler return loss: > 17dB
Impedance 50Ω (Characteristic Impedance)
Connector N type, Source/load: female, Coupler: male
RLB-001 Return Loss
Bridge
Dimension & weight 88 x 54 x 32 (mm), 230g
Note: Among Opt. 05 to 07, only one item can be installed to the GSP-830.
The following are factory installed items. Opt. 01, 03, 04, 05, 06, 07