Rainbow Electronics ATmega3290P_V - Manual (Page 156)

156
ATmega329/339/649/659
2552H–AVR–11/06
The following code examples show how to initialize the SPI as a Slave and how to per-
form a simple reception.
Note: 1. See “About Code Examples” on page 8.
Assembly Code Example (1)
SPI_SlaveInit:
; Set MISO output, all others input
ldi r17,(1<
out DDR_SPI,r17
; Enable SPI
ldi r17,(1<
out SPCR,r17
ret
SPI_SlaveReceive:
; Wait for reception complete
sbis SPSR,SPIF
rjmp SPI_SlaveReceive
; Read received data and return
in r16,SPDR
ret
C Code Example (1)
void SPI_SlaveInit(void)
{
/* Set MISO output, all others input */
DDR_SPI = (1<
/* Enable SPI */
SPCR = (1<
}
char SPI_SlaveReceive(void)
{
/* Wait for reception complete */
while (!(SPSR & (1<
;
/* Return Data Register */
return SPDR;
}