Rainbow Electronics W90N740 - Manual (Page 170)

W90N740
- 166 -
7.10.3 Timer Control Registers Map
R: read only, W: write only, R/W: both read and write, C: Only value 0 can be written
Register Address R/W/C Description Reset Value
TCR0 0xFFF8.1000 R/W Timer Control Register 0 0x0000.0005
TCR1 0xFFF8.1004 R/W Timer Control Register 1 0x0000.0005
TICR0 0xFFF8.1008 R/W Timer Initial Control Register 0 0x0000.00FF
TICR1 0xFFF8.100C R/W Timer Initial Control Register 1 0x0000.00FF
TDR0 0xFFF8.1010 R Timer Data Register 0 0x0000.00FF
TDR1 0xFFF8.1014 R Timer Data Register 1 0x0000.00FF
TISR 0xFFF8.1018 R/C Timer Interrupt Status Register 0x0000.0000
WTCR 0xFFF8.101C R/W Watchdog Timer Control Register 0x0000.0000
Timer Control Register 0 (TCR0)
Timer Control Register 1 (TCR1)
Register Address R/W/C Description Reset Value
TCR0 0xFFF8.1000 R/W Timer Control Register 0 0x0000.0005
TCR1 0xFFF8.1004 R/W Timer Control Register 1 0x0000.0005
31 30 29 28 27 26 25 24
nDBGACK_EN CE IE MODE RESERVED
23 22 21 20 19 18 17 16
RESERVED
15 14 13 12 11 10 9 8
RESERVED
7 6 5 4 3 2 1 0
PRESCALE
nDBGACK_EN [31]: ICE debug mode acknowledge enable
0 = When DBGACK is high, the timer clock will be held
1 = No matter what DBGACK is high or not, the timer clock will not be held
CE [30]: Counter Enable
0 = Stops counting
1 = Starts counting
IE [29]: Interrupt Enable