Grass Valley Turbo iDDR v.2.3 - Manual (Page 75)

Turbo iDDR User Guide 75
Loading media for playout
Loading media for playout
You can load clips or programs in the play display for playout.
To load media using the Clips display:
1. Press or to select a play channel.
2. Press CLIPS to open the Clips display.
3. Rotate the control knob to highlight an asset, then push on the knob to load in the
player display.
The asset thumbnail and properties appear in the clip monitor.
To load a clip that is still recording:
1. Start the recording as described in “To record a clip” on page 65 .
2. Press a play channel button — or .
3. Press MENU , then scroll and select Now Recording using the control knob.
The clip thumbnail and properties appear in the clip monitor. Since the clip is still
recording, the mark-out point is updated periodically.
NOTE: If play channel E-to-E mode is enabled, play channel standard definition
outputs are switched to the record channel input until playout is started. Refer to
“Selecting E-to-E mode” on page 76 .
Related topics:
• “Playing a clip” on page 76
• “Editing a clip” on page 77