Grass Valley Turbo iDDR v.2.3 - Manual (Page 293)

Turbo iDDR User Guide 293
S/PDIF Digital Audio
S/PDIF Digital Audio
Analog Audio
Audio headphone output (with front panel option)
LTC Input/Output
Parameter Specification
Standard IEC 60958
Compressed AC-3 or PCM
Connector BNC
Input Impedance 75 ohms (unbalanced)
Copyright Protection If the audio input material has the copy-protection status bit turned on,
the audio input is muted. Also, warning symbol is displayed in the
Status pane and warning message is written in the Status log.
Parameter Specification
Audio Standard Balanced differential analog
Audio Inputs 2 per record channel, Female XLR
Audio Outputs 2 per play channel, Male XLR
Impedance Input: 15k ohms, balanced
Output: 50 ohms per side, balanced
Sampling and encoding 48 KHz and 16-bit pcm
Parameter Specification
Audio Standard Single-ended analog output with volume control
Channels One stereo pair, switched to monitor selected video channel
Connector 1/4 inch Stereo Audio Jack
Parameter Specification
Standard SMPTE 12M Longitudinal Time Code, AC coupled, differential input
Number of Inputs 1 channel per record - Female XLR
Number of Outputs 1 channel per play - Male XLR
Input Impedance 1K ohm
Output Impedance 50 ohm
Minimum Input Voltage 0.1 V peak-to-peak, differential
Maximum Input Voltage 2.5 V peak-to-peak, differential
Nominal Output Voltage 2.0 V peak-to-peak differential.
LTC Reader LTC reader will accept LTC at rates between 1/30 and 80 times the
nominal rate in either forward or reverse directions.