Grass Valley Turbo iDDR v.2.3 - Manual (Page 247)

Turbo iDDR User Guide 247
Message types displayed in the StatusBar
Message types displayed in the StatusBar
The following table describes the message types that appear in the StatusBar.
Typically, the StatusBar message area displays status messages for the selected
channel, however, if a problem develops with the software application or a hardware
subsystem, an error message is momentarily displayed and the symbol for the
StatusPane button changes.
Using the StatusPane
The StatusPane is used to view detailed system messages including status, warning,
and error messages. The StatusPane provides a central message area where status
messages are listed. The StatusPane also includes subsystem status indicators, and the
StatusPane menu button. The subsystem status indicators display a red X when an
alert message for the subsystem is listed in the StatusPane. A yellow X is displayed
when a warning messages is listed.
StatusPane Topics:
• “Opening the StatusPane” on page 247
• “Showing iDDR software versions” on page 248
• “Managing messages in the Status Pane” on page 248
• “Closing the StatusPane” on page 248
• “Exporting log files” on page 249
Opening the StatusPane
• To open the StatusPane, click the StatusPane button in the AppCenter
StatusBar.
The StatusPane is displayed and you can view messages.
Message Type Example Message
Channel Status
Message Clip loaded, clip recording, no clip loaded.
Channel Error
Message Media disks are full. Cannot record the clip.
Trap Summary
Message The system drive is at full capacity. Disk recorder
operations will fail. Delete unused or temporary assets,
and restart disk recorder.