Grass Valley Turbo iDDR v.2.3 - Manual (Page 255)

Turbo iDDR User Guide 255
Remote control operation: In Workstation mode
Remote control operation: In Workstation mode
You can configure a channel for remote control from either front panel mode or
workstation mode. However, operating remote control from the Workstation mode
provides extended features that allow local and remote control at the same time.
Topics in this section include:
• “Enabling remote control from Workstation mode” on page 255
• “Guide to AMP Recorder: Protocol Only mode” on page 257
• “Guide to AMP Player: Protocol Only mode” on page 259
• “Guide to AMP Recorder: Local/Protocol mode” on page 261
• “Guide to AMP Player: Local/Protocol mode” on page 263
• “Using AMP Recorder: Local control tasks” on page 264
• “Using AMP Player: Local control tasks” on page 265
• “Using front panel transport controls” on page 268
• “Monitoring remote control communications” on page 268
Enabling remote control from Workstation mode
You can configure a channel for remote control operation from Workstation mode. If
the channel is in use at the time, all channel activity is terminated and the current
media is ejected prior to switching to remote control mode.
This procedure contains two sections:
• “Select a control protocol” on page 255
• “Select the control port and control mode” on page 255
Select a control protocol
1. If the Channel Pane is not already in split screen view, select View | Split Screen .
2. In the monitor pane, click the control mode drop-down list list for the
channel, then choose a remote protocol.
The channel changes to remote control mode and becomes the selected channel.
3. Proceed to “Select the control port and control mode” .
Select the control port and control mode
After enabling remote control mode, you must select a control port and control mode–
Protocol control only, or Local and Protocol control.
1. Click the channel monitor in the Monitor Pane .
2. In AppCenter Workstation main menu, click Player or Recorder , as appropriate,
then choose Options .
The Local/Remote dialog box is displayed.