Grass Valley Turbo iDDR v.2.3 - Manual (Page 27)

Turbo iDDR User Guide 27
Turbo iDDR control modes
Turbo iDDR control modes
You can control the Turbo iDDR locally the front panel controls or through
workstation control mode. You can also control the iDDR remotely.
Local control modes
Front panel mode (ONLY)– The front panel includes a 320 by 240 TFT display with
touch screen and VTR-like transport controls. The front panel user interface provides
an on-screen keyboard for text entry (entering names and timecode). An external
keyboard connected to any USB port can be used for text entry or transport control
using keyboard shortcuts. A transport control device that emulates keyboard can be
used to control the iDDR through keyboard shortcuts. See
Chapter 3, Operation: Front
Panel Control on page 49 .
AppCenter Workstation mode (ONLY)– Connecting a keyboard, mouse and VGA
monitor provides access to AppCenter Workstation control application. AppCenter
comes pre-installed and provides a graphical user interface for controlling the Turbo
iDDR. See
Chapter 4, Operation: AppCenter Workstation on page 113 .
In addition:
• The mouse is only used on the AppCenter user interface, not the front panel
application.
• The mouse and keyboard are used to control the iDDR.
• Front panel transport control buttons functional in AppCenter Workstation mode,
i.e. record, play, stop, etc. and Shuttle/Jog.
Front Panel
AppCenter Workstation
(ONLY)
Connect keyboard,
mouse, and VGA monitor
AppCenter Workstation
Connect keyboard,
mouse, and VGA monitor
Remote Control
Device
Control Protocols
over RS-422
(BVW, AMP)
GPI Control
(Six In/Out)
VAR JOG SHTL
R1
P1
MENU
P2
CLIPS
ESC SHIFT
MARK OUT MARK OUT
Front Panel
(ONLY)
VAR JOG SHTL
R1
P1
MENU
P2
CLIPS
ESC SHIFT
MARK OUT MARK OUT
+
Automation
System
Control Protocol
over Ethernet
(AMP)
R1 Menu
Clips
Esc
Shift
Mark
Out
Mark
In
P1
JOG SHTL VAR
P2