Grass Valley Turbo iDDR v.2.3 - Manual (Page 43)

Turbo iDDR User Guide 43
Modifying the front panel setup
Modifying the front panel setup
To access front panel settings:
• On the front panel, press MENU , then choose Tools using the control knob, and
select Panel Options .
- or -
• In the Workstation AppCenter, select System | Configuration , and click Panel .
Setting GPI input triggers
To access GPI input settings:
• On the front panel, press MENU , then choose Tools using the control knob, and
select GPI Input Triggers .
- or -
• In the Workstation AppCenter, select System | Configuration , click GPI , then click
the GPI-Input tab.
Select a menu item… And make settings as needed…
Jog/Shuttle Jog Speed -1X to 1X
-1X to 3X Controls the sensitivity of the Jog/Shuttle
knob on the front panel.
Shuttle Speed -16X to 16X
-32X to 32X
VAR Setting 0.25 X
0.5 X
0.75 X Specifies the preset play speed used when
variable speed play is selected.
Always Start at
VAR Preset Yes
No When this option is selected, whenever you
press the VAR button, the initial play speed
is determined by the VAR preset setting.
Then you can adjust the play speed using the
Jog/Shuttle knob (RANGE: ±1x normal
playback speed). When this option is
cleared, the initial play speed is determined
by the play speed last set by the Jog/Shuttle
knob.
On the GPI Input Triggers
menu, select...
And make settings as needed…
Trigger channel(s) None No GPI inputs are set.
R1 The GPI input controls channel R1.
P1 The GPI input controls channel P1.
P2 The GPI input controls channel P2.