Grass Valley Turbo iDDR v.2.3 - Manual (Page 226)

226 Turbo iDDR User Guide
Chapter 4 Operation: AppCenter Workstation
Using the copy and paste commands
1. Select the asset(s) in the asset list .
2. Copy the asset to the clipboard using one of the following:
• Select Copy in the asset context menu , or
• Select Edit in the AppCenter toolbar, then choose Copy .
• Use the keyboard shortcut Ctrl + C .
3. If needed, change the current bin to the target bin. (Refer to “Changing current bin
using 'Look in' drop-down list.” on page 221 .)
4. Paste the asset(s) from the clipboard to the current bin.
The Paste operation is accessed in the same way as Copy.
NOTE: If an asset is locked or in use, it remains in the existing bin, while the
remaining assets are moved to a new bin with the specified name.
Using Send To
1. Select the asset(s) in the Asset List .
2. To open the Send To dialog box using do one of following:
• Select Clips | Send To , or
• Select Send To in the asset context menu , or
• Select the Send To button in the Clips Pane.
If the Send To button is not displayed in the Clips Pane, refer to assignable
buttons in “Guide to using the Clips Pane” on page 214 .
The Send dialog box appears.
3. In the Send dialog box, click Bin , then Copy to in the left-hand drop-list.
4. Select the target bin name.