Grass Valley Turbo iDDR v.2.3 - Manual (Page 51)

Turbo iDDR User Guide 51
Using the front panel controls
Using the front panel controls
The front panel consists of four main components: the display controls, display and
touch screen, the edit controls, and the transport controls including the control knob.
NOTE: The front panel transport controls (i.e. play, record, stop, etc.) are also used
to control the iDDR in Workstation mode.
The following table describes the front panel controls.
Display & Touchscreen
Used to display and operate the front panel mode graphical user interface.
NOTE: In AppCenter Workstation mode, the front panel display is only
used to monitor iDDR status.
TFT display and
touch screen
Playing a Clip
Record – Hold down PLAY, then press REC.
NOTE: Can be configured for pressing Record only.
Stop – Press STOP to stop Record/Play.
Play – Press PLAY to start playback.
Rewind – Hold down REW, then release the button to cause the clip to return
to the previous mode.
Fast Forward – Hold down FF, then release the button to cause the clip to
return to the previous mode.
Frame reverse – Tap and release the REW button.
Frame advance – Tap and release the FF button.
VAR JOG SHTL
R1
P1
MENU
P2
CLIPS
ESC
SHIFT
MARK
IN
MARK
OUT
Transport Control
Control
Knob
Jog/Shuttle
Controls
Edit Controls
Display &
Touchscreen
Variable Speed
Play Control
Display
Controls
+
- - -or- - -