Grass Valley Turbo iDDR v.2.3 - Manual (Page 261)

Turbo iDDR User Guide 261
Remote control operation: In Workstation mode
Guide to AMP Recorder: Local/Protocol mode
The Local and Protocol control mode allows you to control the record channel locally
as well as remotely. You can select this mode by choosing
Local and Protocol control
in the Options dialog box. ( See “Select the control port and control mode” on
page 255 .)
The following describes the controls and indicators used in the Local and Protocol
control mode.
Control Description and User Operation
" Assignable Buttons Assignable buttons allow you to modify the button assignment to
best suit your workflow. Holding down a button longer than one
second opens the button pop-up menu which lists the alternative
button choices. Button choices include New Clip, Options, Locate
and Properties. The buttons function the same as the context menu
items.
# Current Timecode Indicates the current timecode of the timecode source for recording.
The timecode value of XX:XX:XX:XX is displayed if there is no
input timecode.
$
Timecode Source The text displayed to the right of current timecode indicates the
timecode source: VITC, LTC, or INT (internal generator).
See
“Changing the timecode source” on page 138 .
% Clip Name Edit Control Displays the clip’s name and location in the media storage system.
To rename the clip, touch or click the Clip Name, then use the
onscreen or external keyboard to enter text. To change the current
bin, i.e. the target location for recording clips, refer to
“Changing
the current bin” on page 139 .
6
Current
Timecode Timecode
Source
(Use Context
menu to modify)
Meter Bar
Button
(Click to adjust
audio) Time Dome
2 3 4 Clip Name &
Current Bin
5 7
Assignable
Buttons
(Default buttons
are shown) 1
Length
Button
(Click to specify
clip length) 8 Thumbnail
(Current and
Preview clips)