Grass Valley Turbo iDDR v.2.3 User Manual
Page 28
28
Turbo iDDR User Guide
Chapter 1 Product Introduction
Connecting a keyboard, monitor and mouse to the rear panel provides access to the
AppCenter user interface. You can use mouse and keyboard shortcuts to control the
iDDR. The mouse is only used on the AppCenter user interface, not the front panel
application. See
Chapter 4, Operation: AppCenter Workstation on page 113
.
Front panel and AppCenter mode – In this mode of operation, the Turbo iDDR is
actually in front panel control mode, but AppCenter is still available by connecting a
keyboard, monitor and mouse for managing media, for example, moving, copying,
transporting or deleting clips.
Remote control modes
GPI Control – GPI input triggers can be assigned to channels to control actions such
as record, play, stop, and skip a playlist event. GPI output triggers can be defined for
channels and inserted in playlists to control external equipment as the list is played.
See “Setting GPI input triggers” on page 43
Remote Control Device Using Serial Control Protocols Over RS-422 – The iDDR
can be controlled by devices and applications software developed for the Turbo iDDR
that use serial control protocols over the RS-422 serial port.
control protocols” on page 252
Automation System Using Remote Control Protocols over Ethernet – The iDDR
can be controlled by devices and applications software developed for the iDDR that
use serial control protocols over the Ethernet network.