Grass Valley Turbo iDDR v.2.3 - Manual (Page 149)

Turbo iDDR User Guide 149
Loading media for playout
Loading media for playout
You can load clips or programs in the play display for playout.
Loading clips from the clips pane
1. Select a play channel by clicking in the channel’s monitor pane.
2. Locate the clip in the clips pane. If necessary, change bins by clicking the current
bin control and selecting from the drop-down list.
3. Load the clip in one of the following ways:
• Drag the clip from the clips pane into the play channel.
• Select the clip, then choose the Load button in the clips pane.
• Double-click on the clip.
• Select the clip, then press Enter on the keyboard.
Loading a clip from Player mode
1. Select a play channel by clicking in the channel’s monitor pane.
2. Open the Load Clip dialog using one of the following:
• Click the Load button in Player.
• Select Player | Load .
3. If needed, use the Look in drop-down list to browse to the desired bin.
4. Select a clip in the Load Clip dialog, then click OK .
The clip is loaded in the player.
NOTE: If play channel E to E mode is enabled, play channel standard definition
outputs are switched to the record channel input until playout is started. Refer to
“Selecting E-to-E mode” on page 150 .
Related topics:
• “Playing a clip” on page 150 .
• “Using Cue points for playback” on page 152