Grass Valley Turbo iDDR v.2.3 - Manual (Page 182)

182 Turbo iDDR User Guide
Chapter 4 Operation: AppCenter Workstation
the event in the Properties dialog box and use the on-screen keyboard to change the
name; click
OK .
• Select the event in List view, then switch to the Event View. Select the Event name
control , enter a new name, and click OK .
Adjusting event audio levels
The audio level for each event in the list is adjusted independently.
To adjust the event audio level:
1. With the event loaded in the Event view, click the Meterbar button .
2. Adjust the audio level using the graphical faders or click Unity to return audio to
the last saved level.
3. Click Save to save changes to the event audio level.
NOTE: Changing event audio levels does not affect the source clip. Saved audio
levels are stored and used every time the list is loaded and played. Unsaved changes
are lost when another list is loaded.
4. Click the Meterbar button again to return to Event view.
Changing event thumbnail image
By default, an event's thumbnail is set to the thumbnail of its source clip.
To change an event's thumbnail:
1. Select the event in List View.
2. Select the Event tab to change to Event View.
3. Monitor video output and use the front panel or onscreen transport controls to
position the clip to the desired video frame.
4. Click the thumbnail in the Event pane, then click Yes in the message asking if you
want to change the thumbnail image.
The event will now be represented by the new thumbnail. If the event is the first
play event in the list, then the list thumbnail is updated to refer to the new event
thumbnail.
NOTE: If the you modify the event marks so that the thumbnail is outside of the event's
media, the thumbnail is automatically changed to correspond to the event's mark in
position.