Grass Valley Turbo iDDR v.2.3 - Manual (Page 145)

Turbo iDDR User Guide 145
Guide to using Workstation Player: Control View
& View tabs These tabs toggle between Control and Cue views. Control is used
for playing and editing of clips. During playback, you can use the
Cue view to add cue points so that you can quickly cue a clip to a
frame.
' Thumbnail Used to visually identify the clip. By default, the thumbnail is
generated using the 16th frame of video. To change the thumbnail,
position the clip to the desired frame, then click the thumbnail.
See
“Changing the clip thumbnail image” on page 157 .
( Time Dome
Progress
only
Progress
with media marks
Progress
& loop play
enabled
This multi-function control displays play progress, or play progress
with media marks which shows the relative position of mark-in/
mark-out points in the clip. The timecode underneath indicates play
time remaining. The Time Dome is also used to enable loop play.
Select the Time Dome, then use the pop-up menu to choose the
display mode, or to control loop play mode.
See “Selecting loop
play” on page 150 .
) Set Mark-in and Set
Mark-out These buttons are used to set new mark-in or mark-out points.
Position the clip to the desired frame, then click the In or Out
buttons. Unused media is not deleted. To clear a mark, right-click
the button, then choose Clear Mark in the pop-up menu. Marks are
reset to the beginning or end of available media.
See “Editing a
clip” on page 154 .
* Meter Bar Button Displays the Meterbar which contains the audio play level controls
and signal meters. Clicking the Save button saves changes made to
the clip audio level. Clicking Unity returns the audio levels to the
last saved level.
Control Description and User Operation
Control
Cue