To record a clip – Grass Valley Turbo iDDR v.2.3 User Manual
Page 65
Turbo iDDR User Guide
65
To record a clip
To record a clip
You can record clips using the rear panel video, audio, and timecode input signals. Be
sure to refer to
“Before you record: Recorder settings checklist” on page 62
if you
have trouble recording.
If E-to-E mode is selected, the play channel video output BNCs can be used to
monitor the video input signals.
To record:
1. Press
on the front panel to view recorder display.
2. Use one of the following record modes:
To:
Press:
Then do this:
Name a clip, then start
recording
Name the clip, then press
.
Specify the clip length before
starting record
Enter clip length using on-screen or external keyboard,
then press
.
NOTE: Record stops when clip length is reached.
Use Loop record mode
Enter loop length, then press
.
(
See “About loop record mode” on page 58
.)
Start recording immediately
(crash record), and then rename
the clip later.
N/A
Press