Grass Valley Turbo iDDR v.2.3 - Manual (Page 257)

Turbo iDDR User Guide 257
Remote control operation: In Workstation mode
Guide to AMP Recorder: Protocol Only mode
The Protocol control only mode allows you to only monitor the record channel
operations and view clip information. All control comes from the external device. The
buttons, menu items, and other interface controls are disabled. You can select this
mode by choosing the
Protocol control only option in the Options dialog box. ( See
“Select the control port and control mode” on page 255 .)
The following describes the controls and indicators in the Protocol control only mode.
Control Description and User Operation
" Assignable Buttons The assignable button allows you to modify the button assignment to
best suit your workflow. Holding down a button longer than one
second opens the button pop-up menu which lists the alternative
button choices.
Button choices include Options or Properties. The buttons function
the same as the context menu items.
#
Current Timecode Indicates the current timecode of the timecode source for recording.
The timecode value of XX:XX:XX:XX is displayed if there is no input
timecode.
$ Timecode Source The text displayed to the right of current timecode indicates the
timecode source: LTC, or INT (internal generator). You must
temporarily switch to Local and Protocol control mode to change
the record channel timecode source.
% Clip Name and location Displays the current clip’s name and location in the media storage
system.
Current
Timecode Timecode
Source
(Switch to local control
mode to modify) 2 3 4 Clip Name &
Current Bin Assignable
Buttons
(Default buttons
are shown) 1
Time Dome Thumbnail 6 5