Modifying player channel (p1 and p2) settings – Grass Valley Turbo iDDR v.2.3 User Manual
Page 41
Turbo iDDR User Guide
41
Modifying player channel (P1 and P2) settings
Modifying player channel (P1 and P2) settings
For help in making output type and aspect ratio settings, refer to
.
To access player channel settings:
• On the front panel, press
MENU
,
then
choose
Tools
using the control knob, and
select
P1
or
P2 Setup
.
- or -
• In the Workstation AppCenter, select
System | Configuration
, click
Channel,
and
select the
P1
or
P2
tab.
Select a menu item...
And make settings as needed…
Video Output
Video Output
Format
NTSC (SD)
Select the video format for the play
channel(s).
XGA (1024 X
768)
WXGA (1365 X
768)
1080i
(1920x1080)
Aspect Ratio
Standard
Widescreen
These choices available when Video
output type is NTSC, PAL, or XGA.
Aspect Ration
Conversion
Bars
Crop
Bars and Crop
Refer to
“About video scaling settings”
Output
Component Type
RGB
Y, Pb, Pr
Select your component type.
Output Pedestal
On
Off
Select the appropriate pedestal setting.
Still-play mode
Still-Play mode settings determine how to generate the
still-play signal for the play channel when it is setup to
freeze on last frame of video in stop mode. You can select
line interpolated, or interlaced. Note that in normal play
mode, the play channel can be setup for E to E mode instead
of displaying freeze frame in stop mode. E to E mode is
enabled/disabled in the application running on the channel.
Refer to
“Selecting E-to-E mode” on page 76
Field
(interpolated)
This is the default setting and uses the
content of one field for both fields
during still-play for a one field freeze.
This mode eliminates the motion jitter
that can be present in Interlaced mode.
Frame
(Interlaced)
This mode displays two fields in still
play mode for a two field freeze. With
this mode you might see some motion
jitter in still-play.