Grass Valley Turbo iDDR v.2.3 - Manual (Page 50)

50 Turbo iDDR User Guide
Chapter 3 Operation: Front Panel Control
Guide to using the front panel
This section includes the following topics:
• “Enabling front panel control mode” on page 50
• “Locking the front panel” on page 50
• “Using the front panel controls” on page 51
• “Conventions used in the front panel display” on page 55
Enabling front panel control mode
Front panel display in Workstation mode
If your iDDR is in Workstation mode, you can switch to front panel control mode
using the front panel controls or from Workstation display on the VGA monitor.
NOTE: When the iDDR switches to front panel mode, AppCenter releases control of
all iDDR channels and operation is interrupted.
To enable to front panel control mode, do one of the following:
• In AppCenter, click View , then select Front Panel .
- or -
• On the front panel, press , then select Front Panel .
Locking the front panel
Locking the front panel prevents accidental interruption of iDDR operation.
• To lock the front panel, press the MENU button, then use the control knob to scroll
and select Tools, then select Lock Out Panel .
• To unlock the front panel, press the front panel ESC/SHIFT and the MENU buttons,
then uncheck Panel Locked .