Grass Valley Turbo iDDR v.2.3 - Manual (Page 31)

Turbo iDDR User Guide 31
Accessing the Windows operating system
Accessing the Windows operating system
Some tasks require access to the Windows operating system that runs on the Turbo
iDDR, for example, modifying network settings.
To access the Windows desktop:
1. If in front panel mode, power-off the iDDR, then connect a keyboard, mouse, and
VGA monitor.
2. Press the front panel standby switch to Power-on.
The iDDR initializes then starts the Windows operating system which
automatically logs on using the Administrator user account.
CAUTION: The Turbo iDDR is not a general purpose Windows
workstation. The Windows configuration on the iDDR has been
specifically set for use as a real time device. The Turbo iDDR is
configured for automatic logon allowing unattended booting. To avoid
partial or total system failure, do not modify any operating system
settings unless approved by Grass Valley Support. This includes but is
not limited to the following:
— Do not use the User Manager
— Do not use the Disk Administrator
— Do not load any third party software
— Do not install any Windows updates (these are distributed by
Thomson Grass Valley).
!