Grass Valley Turbo iDDR v.2.3 - Manual (Page 39)

Turbo iDDR User Guide 39
Configuring your Turbo iDDR
Configuring your Turbo iDDR
You can configure your system using either the front panel or the Workstation
AppCenter.
Modifying system settings
To access system settings:
• On the front panel, press MENU , then choose Tools using the control knob, and
select All Channels .
- or -
• In the Workstation AppCenter, select System | Configuration , then click System .
Modifying recorder channel (R1) settings
To access recorder channel settings:
• On the front panel, press MENU , then choose Tools using the control knob, and
select R1 Setup .
- or -
• In the Workstation AppCenter, select System | Configuration , and click Channel .
Select a menu item... And make settings as needed…
Video Reference
standard NTSC (59.94 Hz) Choose for the NTSC standard.
PAL (50 Hz) Choose for the PAL standard.
Reference Present Green LED indicates source is present.
Black LED indicates source is not present.
Reference Locked Green LED indicates system is locked.
Black LED indicates system is not locked.
Time of day source The time of day source is used for event scheduling, such as automatic play and
record events.
System Clock The local Windows operating system
clock. If you select this source you should
verify that the clock’s time is correct
LTC Input The channel’s LTC input.
Audio reference
level 0 dBU
+4 dBU
-4 dBU Select the audio reference level used at
your facility.