Grass Valley Turbo iDDR v.2.3 - Manual (Page 25)

Turbo iDDR User Guide 25
Front panel controls and indicators
Front panel controls and indicators
The front panel includes the following controls and indicators:
WARNING: The power standby switch does not turn off power
to the system. The system must be disconnected from the power
source.
R1 Menu
Clips
Esc
Shift
Mark
Out
Mark
In
P1
JOG SHTL VAR
P2
Standby button
Power on indicator
Front Panel Controls
Drive busy indicator
1394A
Connector
Head phone jack
& volume control USB 2.0
Connector
Drive
Bay
(See page 50 )
!
Control or Indicator Description
Standby Button Provides system On/Off control
NOTE: If you believe your iDDR is “hung” in an unresponsive
state, you can perform a forced shutdown by pressing and holding
the standby button for approximately five seconds.
Power-On Indicator Indicates the standby switch is in the On position and operates as
follows:
On: Power is on and the Turbo iDDR is operational.
Blinking: Turbo needs service. Refer to the Turbo iDDR Service
Manual.
Drive busy indicator Indicates that data is being written or read to disk
Headphone jack and volume
control Used to monitor the audio output signal of the selected channel.
Switches automatically when a channel is selected.
IEEE1394A and USB
Connectors Connectors for capable devices; useful for media import/export
Front panel controls Provides VTR-like controls for operating the iDDR. Refer to “Guide
to using the front panel” on page 50 .
Drive Bay Houses the removable media drives.